Reverse osmosis water purifier water production non-stop what is wrong? Check these 4 things and troubleshoot easily!

Whether it is a home or commercial reverse osmosis water purifier, if you find that it does not stop making water, do not panic, with me to explore the truth!

Cause analysis:

01 High pressure switch failure: the key “valve” out of control!
Reverse osmosis water purifier high-pressure switch, like the entire water production process “commander”. Under normal circumstances, when the water pressure in the storage bucket reaches a set value, it will decisively give the “stop making water” command. But if the switch malfunction, such as internal contacts stick, it becomes “deaf ears - set up”, can not perceive the water pressure is full, the water purifier will naturally be like a hard-working over the small bees, non-stop water production. At this time, you may find that the water storage bucket is obviously already very full, the water is almost overflowing, but the machine is still humming, hard work.

02 check valve damage: water flow “one-way” blocked
Check valve, the name sounds very professional, its role is to ensure that the water can only flow in accordance with the direction of the provisions of the flow, is a no-brainer “water flow one-way administrator”. Once the check valve is damaged, for example, the spool is stuck by impurities, or sealing is not tight, there will be a big problem - has been filtered through the reverse osmosis membrane, ready to be deposited into the storage tank of pure water, will sneak back to the end of the water production. This makes the machine mistakenly think that the bucket is not full, and then open the infinite cycle of water production mode, not only waste of water, but also loss of machine life.

03 reverse osmosis membrane clogging: purification core “traffic jam”!
Reverse osmosis membrane is the core of the water purifier “purification bear”, it can be impurities in the water, heavy metals and other harmful substances are blocked outside the door. However, with the use of time growth, if there is no regular replacement of the cartridge, the water sediment, colloids, microorganisms and other impurities will accumulate on the surface of the membrane, the tiny filtration pores blocked tightly. At this time, the speed of water production will be greatly reduced, in order to achieve the set amount of water, the water purifier can only be forced to extend the working time, water production non-stop. Moreover, the clogged reverse osmosis membrane will also affect the water quality, so that the purification effect plummeted, we drink to the mouth of the water may not be so pure.

04 computer board failure: intelligent “brain” disorder
Now most of the reverse osmosis water purifier has an intelligent computer board, it is like a human brain, controlling the rhythm of the entire water production process. If the computer board malfunction, the program is wrong, it may issue the wrong water production instructions. For example, it misjudges the water level information of the storage bucket, or receives incorrect feedback signals from the high-pressure switch, the check valve and other components, which will cause the water purifier to produce water without stopping. In this case, often accompanied by abnormal data on the display, or machine lights flash, as if to you “help”. Encountered reverse osmosis water purifier water production non-stop, we must not blindly dismantle their own repair, be sure to cut off the power 🔌, to avoid accidents.

If you have a certain understanding of the water purifier, you can first check the simple problems, such as look at the cartridge is not the time to change, check the various water pipe connections there is no leakage. If the problem is tricky, do not hesitate to contact the professional after-sales maintenance personnel 👨‍🔧, so that they use professional tools and knowledge, to help us quickly solve the problem, and drink safe water again 💦!