“ 0 ZERO WATER “What exactly is a water purifier? Do you know?

“ 0 ZERO WATER “What exactly is a water purifier? Do you know?

Now a lot of people say that the water purifier to buy ZERO WATER, many manufacturers are also publicizing 0 ZERO WATER water purifier.
The market publicity and everyone understands the “0 water” is actually the first cup of water TDS value is relatively high problem.
TDS value is high how to happen?
Because the pump pressurization is from 0 ~ 4kg, during this period of water through the RO membrane (reverse osmosis membrane), water pressure pressure is not enough, so it will come out of the TDS value will be high.

Everyone defines this water as stale water. Is the intuitive sense of the TDS value to illustrate.
On the market to solve the problem of “0 stale water”, to solve the problem of stale water, there are two programs.
The first, reduce the quality of raw water, that is, reduce the TDS value of raw water.
Second, dilution.
The solution to the first program is pure water reflux.
The solution of the second program is to increase the small pressure barrel inside the machine.
So the person who invented the concept of “0 aged water” is a genius, a very smart person. He reintroduced the TDS value as a tool to water purifiers, and through a simple technical process, he was able to achieve a better market focus.
Chan water, whether in any small flow or high flow machine, is the problem. This in itself is the pump pressurization process can not be avoided, unless you can use a pump to open the faucet, direct pressure jump from 0 to 4 kilograms.
Does the average household use to focus on stale water or not?
If you are particularly concerned about these concepts, then you can go for the “0 stale water” water purifier, although its price may be a bit higher.
If you just want to solve the problem at a low cost, then adding an external pressure tank is a very good low cost solution.
You'll find that the stale water problem occurs more often with high flow products. That's the technical principle.

The biggest impact of stale water is probably still the use of instant hot water line heaters, and if you get water directly from the line heater, you may have a scaling problem inside the line heater where the scaling area is larger. There is some risk to safe use.
About 0 stale water problem, there is no cure at all, because the pump boosting process is linear can not be changed.
No matter how these two ways to solve the problem in the end there will still be some so-called stale water, either drained or diluted.